{"product_id":"variable-mitre-angle-pipe-elbow-cutting-jig-v2-5-degree-od-tube","title":"Variable Mitre Angle Pipe Elbow Cutting Jig V2 (5° Steps) 1.5D \/ 2D – OD Tube","description":"\u003ch2\u003eMitre jig with a slot every 5°, for 1.5D and 2D mandrel bends\u003c\/h2\u003e\n\u003cp\u003eOur second mitre block. It works the same way as the original: set the key, butt the bend against it and cut at the face of the block. The difference is the scale. There is a slot every 5° from 5° to 85°, set in two staggered rows so the numbers stay readable, which gives you 17 angles from one block.\u003c\/p\u003e\n\u003cp\u003eEach engraved line sits on the true cut edge of its slot, the size is marked along the outer edge, and thumb recesses on the joint make the two halves easy to pull apart.\u003c\/p\u003e\n\u003ch3\u003eWhich version do I need?\u003c\/h3\u003e\n\u003cp\u003eThis listing covers \u003cstrong\u003e1.5D and 2D bends\u003c\/strong\u003e. Pick your tube size, then the bend radius. 1.5D means the centreline radius of the bend is 1.5 times the tube's outside diameter, and 2D is twice (the table below gives both in millimetres). If 10° steps are enough, the \u003ca href=\"\/products\/variable-mitre-angle-pipe-elbow-cutting-jig-fixtures-1-5d\"\u003eoriginal mitre jig\u003c\/a\u003e costs a little less. For tight 1D bends, see the \u003ca href=\"\/products\/variable-mitre-angle-pipe-elbow-cutting-jig-1d-od-tube\"\u003e1D mitre jig\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThese blocks are sized for \u003cstrong\u003eOD tube\u003c\/strong\u003e: mandrel bends sold by their outside diameter. They don't suit SCH10S weld elbows, which are made to a different bend radius. For those, see the \u003ca href=\"\/products\/variable-mitre-angle-pipe-elbow-cutting-jig-sch10s\"\u003eSCH10S mitre jig\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eOpen the block and lay your bend in the bottom half.\u003c\/li\u003e\n\u003cli\u003ePush the key into the slot for the angle you want.\u003c\/li\u003e\n\u003cli\u003eSlide the bend round until its end sits against the key, then drop the top half on. Magnets hold the two halves together.\u003c\/li\u003e\n\u003cli\u003eMark round the bend at the end face of the block, or cut flush to the face. The piece between the key and the face is the angle on the scale.\u003c\/li\u003e\n\u003cli\u003eWhen you're done, the key stores in the block.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngles:\u003c\/strong\u003e every 5° from 5° to 85°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend radius:\u003c\/strong\u003e 1.5D or 2D, chosen when you order\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalves:\u003c\/strong\u003e two, held together by magnets and lined up by locating pins, with thumb recesses for opening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle key:\u003c\/strong\u003e included. It stores in the block when not in use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarkings:\u003c\/strong\u003e black angle scale and size label\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall bracket:\u003c\/strong\u003e the block hangs on our wall bracket, which isn't included. Ask if you'd like one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade:\u003c\/strong\u003e to order in our UK workshop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSizes\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eTube OD\u003c\/th\u003e\n\u003cth\u003e1.5D bend radius (CLR)\u003c\/th\u003e\n\u003cth\u003e2D bend radius (CLR)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.5\"\u003c\/td\u003e\n\u003ctd\u003e38.1 mm\u003c\/td\u003e\n\u003ctd\u003e57.2 mm\u003c\/td\u003e\n\u003ctd\u003e76.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.75\"\u003c\/td\u003e\n\u003ctd\u003e44.45 mm\u003c\/td\u003e\n\u003ctd\u003e66.7 mm\u003c\/td\u003e\n\u003ctd\u003e88.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003ctd\u003e50.8 mm\u003c\/td\u003e\n\u003ctd\u003e76.2 mm\u003c\/td\u003e\n\u003ctd\u003e101.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.25\"\u003c\/td\u003e\n\u003ctd\u003e57.15 mm\u003c\/td\u003e\n\u003ctd\u003e85.7 mm\u003c\/td\u003e\n\u003ctd\u003e114.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003ctd\u003e63.5 mm\u003c\/td\u003e\n\u003ctd\u003e95.3 mm\u003c\/td\u003e\n\u003ctd\u003e127 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.75\"\u003c\/td\u003e\n\u003ctd\u003e69.85 mm\u003c\/td\u003e\n\u003ctd\u003e104.8 mm\u003c\/td\u003e\n\u003ctd\u003e139.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003ctd\u003e76.2 mm\u003c\/td\u003e\n\u003ctd\u003e114.3 mm\u003c\/td\u003e\n\u003ctd\u003e152.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003ctd\u003e88.9 mm\u003c\/td\u003e\n\u003ctd\u003e133.4 mm\u003c\/td\u003e\n\u003ctd\u003e177.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\"\u003c\/td\u003e\n\u003ctd\u003e101.6 mm\u003c\/td\u003e\n\u003ctd\u003e152.4 mm\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4.5\"\u003c\/td\u003e\n\u003ctd\u003e114.3 mm\u003c\/td\u003e\n\u003ctd\u003e171.5 mm\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNeed a size or radius that isn't listed? \u003ca href=\"\/pages\/contact\"\u003eGet in touch\u003c\/a\u003e and we'll quote it.\u003c\/p\u003e\n\u003ch3\u003eGuides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/blogs\/guides\/1d-vs-1-5d-vs-2d-bend-radius\"\u003e1D vs 1.5D vs 2D bends\u003c\/a\u003e: what the bend radius numbers mean and how to measure yours\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/blogs\/guides\/sch10s-pipe-vs-od-tube-sizes\"\u003eSCH10S pipe vs OD tube sizes\u003c\/a\u003e: how to tell which you have\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bendlabs","offers":[{"title":"1.5 inch \/ 1.5D","offer_id":55299176989013,"sku":"VMB-003","price":59.99,"currency_code":"GBP","in_stock":true},{"title":"1.5 inch \/ 2D","offer_id":55299177021781,"sku":"VMB-003","price":74.99,"currency_code":"GBP","in_stock":true},{"title":"1.75 inch \/ 1.5D","offer_id":55299177054549,"sku":"VMB-003","price":60.99,"currency_code":"GBP","in_stock":true},{"title":"1.75 inch \/ 2D","offer_id":55299177087317,"sku":"VMB-003","price":75.99,"currency_code":"GBP","in_stock":true},{"title":"2 inch \/ 1.5D","offer_id":55299177120085,"sku":"VMB-003","price":61.99,"currency_code":"GBP","in_stock":true},{"title":"2 inch \/ 2D","offer_id":55299177152853,"sku":"VMB-003","price":76.99,"currency_code":"GBP","in_stock":true},{"title":"2.25 inch \/ 1.5D","offer_id":55299177185621,"sku":"VMB-003","price":64.99,"currency_code":"GBP","in_stock":true},{"title":"2.25 inch \/ 2D","offer_id":55299177218389,"sku":"VMB-003","price":79.99,"currency_code":"GBP","in_stock":true},{"title":"2.5 inch \/ 1.5D","offer_id":55299177251157,"sku":"VMB-003","price":67.99,"currency_code":"GBP","in_stock":true},{"title":"2.5 inch \/ 2D","offer_id":55299177283925,"sku":"VMB-003","price":82.99,"currency_code":"GBP","in_stock":true},{"title":"2.75 inch \/ 1.5D","offer_id":55299177316693,"sku":"VMB-003","price":70.99,"currency_code":"GBP","in_stock":true},{"title":"2.75 inch \/ 2D","offer_id":55299177349461,"sku":"VMB-003","price":85.99,"currency_code":"GBP","in_stock":true},{"title":"3 inch \/ 1.5D","offer_id":55299177382229,"sku":"VMB-003","price":74.99,"currency_code":"GBP","in_stock":true},{"title":"3 inch \/ 2D","offer_id":55299177414997,"sku":"VMB-003","price":89.99,"currency_code":"GBP","in_stock":true},{"title":"3.5 inch \/ 1.5D","offer_id":55299177447765,"sku":"VMB-003","price":79.99,"currency_code":"GBP","in_stock":true},{"title":"3.5 inch \/ 2D","offer_id":55299177480533,"sku":"VMB-003","price":94.99,"currency_code":"GBP","in_stock":true},{"title":"4 inch \/ 1.5D","offer_id":55299177513301,"sku":"VMB-003","price":83.99,"currency_code":"GBP","in_stock":true},{"title":"4.5 inch \/ 1.5D","offer_id":55299177546069,"sku":"VMB-003","price":104.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9364\/5653\/files\/bendlabs-mitre-jig-v2-3in-1-5d.jpg?v=1791713989","url":"https:\/\/bendlabs.co.uk\/products\/variable-mitre-angle-pipe-elbow-cutting-jig-v2-5-degree-od-tube","provider":"Bendlabs","version":"1.0","type":"link"}