{"product_id":"turbo-manifold-mockup-kit-1-5-nps-sch10s-starter","title":"Turbo Manifold Mockup Kit 1.5\" NPS SCH10S (48.3mm OD) – 73pc STARTER","description":"\u003ch2\u003eTurbo manifold and header mockup blocks for 1.5\" NPS schedule 10 pipe\u003c\/h2\u003e\n\u003cp\u003eThe entry point into the Bendlabs system in our larger pipe size, matched to 1.5\" NPS SCH10S (48.3mm OD). 73 magnetic mockup blocks cover a single manifold or header on a larger displacement or higher power build, where primary diameter is stepped up to suit the flow. Route it in plastic, confirm it fits, then cut stainless knowing the design already works.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRoute a complete manifold or header in 1.5\" NPS pipe before cutting anything\u003c\/li\u003e\n\u003cli\u003eSuit larger displacement and higher power builds needing more primary area\u003c\/li\u003e\n\u003cli\u003eBalance primary lengths by counting blocks\u003c\/li\u003e\n\u003cli\u003eModel the merge collector and confirm the collector angle before you cut\u003c\/li\u003e\n\u003cli\u003eFind clearance problems on the bench, where they cost nothing\u003c\/li\u003e\n\u003cli\u003eProduce an exact cut list and material order\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKit contents (73 pcs)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 × 30° 1D\u003c\/li\u003e\n\u003cli\u003e6 × 30° 1.5D\u003c\/li\u003e\n\u003cli\u003e6 × 45° 1D\u003c\/li\u003e\n\u003cli\u003e6 × 45° 1.5D\u003c\/li\u003e\n\u003cli\u003e6 × 90° 1D\u003c\/li\u003e\n\u003cli\u003e6 × 90° 1.5D\u003c\/li\u003e\n\u003cli\u003e12 × 15 mm straight\u003c\/li\u003e\n\u003cli\u003e8 × 25 mm straight\u003c\/li\u003e\n\u003cli\u003e4 × 50 mm straight\u003c\/li\u003e\n\u003cli\u003e2 × 75 mm straight\u003c\/li\u003e\n\u003cli\u003e2 × 100 mm straight\u003c\/li\u003e\n\u003cli\u003e2 × Flexible Flange Adapters\u003c\/li\u003e\n\u003cli\u003e5 × Flat Pipe Measuring Gauges\u003c\/li\u003e\n\u003cli\u003e1 × Pipe Guide\u003c\/li\u003e\n\u003cli\u003e1 × Heavy Duty Plastic Carry Case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePipe compatibility\u003c\/h3\u003e\n\u003cp\u003eMatched to 1.5\" NPS schedule 10S stainless pipe, 48.3mm outside diameter. Pipe is sized by nominal bore rather than outside diameter, so 1.5\" NPS pipe is not interchangeable with 1.5\" OD mandrel bent tube. If you are building in tube, this is not the right kit.\u003c\/p\u003e\n\n\u003ch3\u003eHeader and manifold mockup, step by step\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the flange adapters to your head flange or turbo flange\u003c\/li\u003e\n\u003cli\u003eSnap bends and straights together, rotating each joint to clear obstructions\u003c\/li\u003e\n\u003cli\u003eAdjust until every primary is routed and the lengths are balanced\u003c\/li\u003e\n\u003cli\u003eCount your blocks for the cut list, then cut, tack and TIG weld to match\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePipe size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5\" NPS SCH10S (48.3mm OD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBend radii\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1D and 1.5D CLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBend angles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30°, 45°, 90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJoint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFriction fit with embedded magnets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e73\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufactured\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order in our UK workshop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMade to order in Britain\u003c\/h3\u003e\n\u003cp\u003eEvery kit is produced to order in our own workshop rather than pulled off a shelf. That is why we can supply centreline radii and pipe sizes the imported kits do not offer. Need a size that is not listed? Get in touch and we will quote it.\u003c\/p\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eShould I be building in 1.25\" or 1.5\" NPS?\u003c\/strong\u003e\u003cbr\u003e\nPrimary diameter follows displacement, target power and where you want the torque. 1.25\" NPS suits most four cylinder builds. 1.5\" NPS suits larger displacement and higher power, where the smaller size would restrict flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to design an exhaust header?\u003c\/strong\u003e\u003cbr\u003e\nYes, provided you are building in pipe. These blocks match 1.5\" NPS schedule 10 pipe, not mandrel bent tube sized by outside diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs 73 pieces enough?\u003c\/strong\u003e\u003cbr\u003e\nYes, for a single manifold or header with a straightforward routing. Convoluted layouts in tight bays may need a bend pack on top.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add to this kit later?\u003c\/strong\u003e\u003cbr\u003e\nYes. Straights and 30, 45 and 90 degree bends are all sold as add-on packs in this same 1.5\" NPS SCH10S size, so you can top up whichever angle you run short on.\u003c\/p\u003e","brand":"Bendlabs","offers":[{"title":"Default Title","offer_id":54844030288213,"sku":"EMK-STARTER-S12","price":199.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9364\/5653\/files\/EMK-STARTER-12.png?v=1788515787","url":"https:\/\/bendlabs.co.uk\/products\/turbo-manifold-mockup-kit-1-5-nps-sch10s-starter","provider":"Bendlabs","version":"1.0","type":"link"}